DEVISER Desktop AE8600D Optical Spectrum Analyzer
Product Descriptions:
The AE8600D is a high-precision diffraction-grating, high-resolution optical spectrometer with wavelength range of 600nm to 1700nm. The 10.1” LCD touchscreen and concise graphical user interface of AE8600D offer the easiest way to handle optical spectrum analysis.
AE8600D provides a wide selection of test methodology, including laser spectrum scans (DPB, FP), WDM system testing, EDFA system testing, transmittance and drift testing, which are essential for in-field and factory applications. The AE8600D offers exceptional stability and reliability, high-speed spectral sweeping, and multiple ways to export and analyze measurement data. It’s the ideal instrument for fast and precise optical spectral testing to satisfy long-term investment with the best cost performance value.
Key Benefits:
•Single mode and multi-mode wavelength range from 600nm to 1700nm.
•Wide range of power measurement from +20dBm to -90dBm and wide dynamic range up to 75dB typical
•Outstanding wavelength & power measurement accuracy with λ resolution up to 0.02nm and built-in calibration source(Option)
•WDM, Laser, and EDFA test modes
•10.1" 1280x800 TFT touchscreen LCD
•Multiple data storage and interface – LAN (RJ-45), USB, RS232, GP-IB(Option) … etc.
•Customizable auto-test scenario
Typical Applications:
Optical Amplifier (EDFA) Measurement
• PSSE– Source Spontaneous Emission (SSE) spectral density at the signal wavelength
• PASE – Total noise spectral density, including SSE, at the signal wavelength
• Gain
• Noise coefficient
Distributed Feedback Laser Diode (DFB LD) Analysis
• Center wavelength and power
• Total power
• Bandwidth
• Side Mode Suppression Ratio (SMSR)
• Optical Signal-to-Noise Ratio (OSNR)
• Drifting of center wavelength
Wavelength-Division Multiplexing (WDM) Channel Analysis
• Channel wavelength and power
• Channel drifting
• Optical Signal-to-Noise Ratio (OSNR)
• Bandwidth
Fabry-Perot Laser Diode (FP LD) Analysis
• Center wavelength and power
• Root-Mean-Square (RMS) and Full Width at Half Maximum (FWHM) of power spectral density over wavelength range
• Bandwidth
• Mode separation
Gas measurement
When used with broadband light sources such as super continuum (SC) or super luminescent diode (SLD), the AE8600D can display the light absorption spectrum of the measured gas mixture.
Notch Width Measurement
With notch width measurement, it is possible to measure pass band width/notch width from the measure waveform of a filter with V-character type or U-character type wavelength characteristics.
Functions:
Item | Function |
Measurement | |
Sweep mode | Repeat sweep, single sweep, AUTO (automatically sets measuring condition) , sweep between marker, data logging |
Condition Setting | Center wavelength, span, wavelength sampling points, wavelength resolution, measurement sensitivity, high dynamic mode, average count(1 to 999), double-speed measurement mode, smoothing, APC level correction |
Others | Sweep status output, analog output |
Display | |
Vertical scale | Level scale (0.1 to 10dB/div., linear) , level subscale (0.1 to 10dB/div., linear) , reference level display, DIV display (8, 10 or 12) , power density (dB/nm), dB/km, %, noise mask |
Horizontal scale | wavelength (nm), frequency(THz), zoom |
Display mode & items | Single waveform display, split screen display, data table display, label display, template display, measurement condition display |
Trace | |
Trace functions | Simultaneous display of 7 independent traces, max/min value detection display, calculation between traces display, normalized display, curve fit display, peak curve fit display, marker curve fit display, roll averaging (2 to 100 times) |
Others | Trace copy /trace clear, Write/Fix setting, show / hide setting |
Marker &Search | |
Marker | Delta marker(Max.1024), vertical / horizontal line markers, advanced marker |
Search | Peak search, bottom search, auto search (On/OFF), search between vertical axis line marker, search within zoom area |
Data analysis | |
Analysis functions | Spectral width analysis (threshold, envelope, RMS, peak-RMS, notch) , WDM (OSNR) analysis, EDFA-NF analysis, filter peak/bottom analysis, WDM filter peak/bottom analysis, DFB-LD/FP-LD/LED analysis, SMSR analysis, power analysis, PMD analysis |
Others | Auto analysis execution setting(ON/OFF), analysis between vertical axis line markers, analysis within the zoom area |
Other functions | |
Alignment | Auto alignment using built-in calibration light source. |
Specifications:
Optical Spectrum Measurement :
Applicable fiber | SM(9.5/125μm), MMF(50/125μm, 62.5/125μm) |
Wavelength range1 | 600 ~ 1700nm |
Wavelength resolution bandwidth | 0.02 ~ 2nm |
Wavelength resolution setting1,2 | 0.02nm, 0.05nm, 0.1nm, 0.2nm, 0.5nm, 1nm, 2nm |
Wavelength resolution bandwidth accuracy1,2,5 | ±5%(1450 to 1620nm, Resolution setting:≧0.1nm, after performing the Resolution Calibration function, at the wavelength of resolution calibration) |
Wavelength accuracy1,2,5 | 1520 to 1620 nm ±0.015 nm 1450 to 1520 nm ±0.025 nm entire wavelength range ±0.1 nm |
Wavelength repeatability1,2 | ±0.01 nm (1 min.) |
Wavelength linearity1,2,5 | ±0.015 nm (1520 to 1580 nm) ±0.025 nm (1450 to 1520 nm,1580 to 1620 nm) |
Min. sampling resolution1 | 0.001nm |
Level sensitivity2,3,4,7 | -90dBm(1300-1620nm,resolution ≥0.05nm,sensitivity:HIGH3) -85dbm(1000-1300nm,resolution ≥0.05nm,sensitivity:HIGH3) -55dBm(600-1000nm,resolution ≥0.05nm,sensitivity:HIGH3) |
Maximum input power2,3 | +20dBm(Per channel,full range) |
Maximum safe input power2,3 | ±25dBm(Total input power) |
Level accuracy2,3,4,6 | ±0.3dB(1310/1550nm, input level: -20dBm) |
Level linearity2,3 | ±0.08dB(input level:-50~+10dBm, sensitivity: HIGH1/HIGH2/HIGH3) |
Level flatness2,3,6 | ±0.1dB(1520 to 1580nm), ±0.2dB(1450 to 1520nm, 1580 to 1620nm) |
Wavelength sampling points | 101 to 50001, AUTO |
Optical return loss11 | >35dB (with angled-PC connector) |
Polarization dependence2,3,6 | ±0.08dB(1550nm) |
Dynamic range1,2,8 | Peak ±0.1nm 50dB(resolution: 0.02nm) Peak ±0.4nm 70dB(resolution: 0.05nm) Peak ±1.0nm 75dB(resolution: 0.05nm) |
Level sensitivity setting | NORM_HOLD, NORM_AUTO, NORMAL, MID, HIGH1, HIGH2, HIGH3 |
Stray-light suppression ratio7,10 | 75dB |
Sweep time1,7,9 | 0.2s(NORM_AUTO),0.8s(NORMAL),1.8s(MID) 4s(H1),16s(H2),60s(H3) (SPAN ≤100nm Sampling Points 1001) |
Warm-up time | Minimum 1hour |
General Specifications:
Display | 10.1 inch TFT LCD touchscreen (Resolution: 1280×800) |
Interface | USB2.0 ×5, USB 3.0, VGA, GP-IB (Option) |
RJ45 LAN port (10M/100M/1000M), RS232-DB9 | |
Data storage | Internal storage: 120GB hard-drive File types: CSV,Binary,BMP |
Operating temperature | +5 ~ +35℃ |
Storage temperature | -10 ~ +50℃ |
Power supply | AC 100-240V 1.7A 50~60Hz |
Dimensions | 427*221*448 (mm) |
Weight | 17kg |
Performance temperature | +18 ~ +28℃ |
Safety standards | EN61010-1 |
EMC(Emission) | EN IEC 61326-1, EN IEC 61326-2-1 and CISPR 16-1 series standards, Class A Group 1, IEC61000-3-2, EN 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8, IEC 61000-4-4, IEC61000-4-6, IEC 61000-4-11 |
Remarks:
1. Horizontal axis scale: In wavelength display mode.
2. 9.5/125 μm single mode fiber (PC polishing), after warm-up of 1 hours, after alignment with a built-in wavelength reference
light source or single longitudinal mode laser (wavelength: 1520 to 1560 nm, wavelength stability: ±0.01 nm or less)
3. Vertical scale: absolute value level display mode, resolution setting: 0.05 nm or more, resolution correction: OFF
4. When using 9.5/125 μm single mode fiber
5. After wavelength calibration using a built-in wavelength reference light source or single longitudinal mode laser
6. With the resolution setting of 0.05 nm, at ambient temperature of 23 ±3 °C.
7. High dynamic mode: OFF, pulse light measurement mode: OFF, resolution correction: OFF
8. 1523 nm, high dynamic mode:SWITCH, resolution correction: OFF
9. Span 100 nm or less, wavelength sampling points: 1001, averaging times: 1
10. When applying a HeNe laser (1523 nm), resolution: 0.1 nm, 1520 nm to 1620 nm (excluding peak wavelength ± 2 nm).
11. When using the signal mode fiber with our standard Angled PC connector, it is 15 dB(Typ.) when using the PC connector
Ordering Information:
Description Part No. Ordering No. | ||
AE8600D Optical Spectrum Analyzer (standard package) | AE8600D | 0260.8600.07 |
FC Connector Adapter for Optical Input(standard configuration installed at factory) | AE8600-001 | 6260.0400.03 |
CD with User Manual | AE8600-003 | 6260.0600.09 |
Calibration and Compliance Certificate | DS1001-001 | 6190.0600.05 |
Options | ||
SC Connector Adapter for Optical Input | AE8600-002 | 6260.0400.04 |
Built-in Calibraton Light Source(default with FC/APC Connector Adapter) | AE8600-200 | 2260.8600.00 |
PCIE-GPIB | AE8600-700 | 6260.0400.05 |
Calibration Certificate (with data) | AE8600-004 | 6260.0600.10 |
Power Cord (1.5m) | SA8300-700 | 6190.0500.40 |
Power Adaptor Plug Cord (Europe) | AE4000-733 | 6290.0500.03 |
Power Adaptor Plug Cord (Unite States) | AE4000-734 | 6290.0500.04 |
Power Adaptor Plug Cord (United Kingdom) | AE4000-735 | 6290.0500.05 |
Power Adaptor Plug Cord (Australia) | AE4000-736 | 6290.0500.06 |
Contact us
____________
Shanghai Govo Telecom Co., Ltd.
Add: Room 616, North Building, Fortune 108 Square, 1839#Qixin Road,
Minhang District, 201101, Shanghai, China
Email: gw@gwfiber.com; veronica@govochina.cn
Contact: Ms. Veronica Zhao
Office: +86 21-6 0 7 1 2 3 2 5
Mob: +86 1 3 7 8 8 9 1 3 2 6 7
Skype: govochina
Products
_________
Fiber Optic Tool & Tool Kit
Fiber Optic Splicing Equipment
Fiber Optic Test Instrument
Ethernet Cable Tester
Fiber Optic Cable
Optical Fiber