DEVISER E7042B SignalPROFILER RF Analyzer(9kHz~4 GHz Spectrum Analyzer, 2 MHz~4GHz Cable&Antenna Analyzer)
    Publish time 2020-08-26 15:59    

DEVISER E7042B SignalPROFILER RF Analyzer(9kHz~4 GHz Spectrum Analyzer, 2 MHz~4GHz Cable&Antenna Analyzer)

 

 DEVISER E7042B SignalPROFILER RF Analyzer

( 9kHz~4GHz Spectrum Analyzer, 

2 MHz~4GHz Cable&Antenna Analyzer)


Product Descriptions:

 E7042B SignalPROFILER (CA: 2 MHz to 4 GHz, SA: 9 kHz to 4 GHz)

The SignalPROFILER combines the power and functionality of cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/Optical power measurements in a single instrument.

Key Features:

• RF, fiber and wireless signal quality testing – in a single instrument

• Perform traditional RF feedline tests, inspect fiber connectors with auto pass/fall results and measure RF/Optical power

• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment

• Test MIMO 4x4 antenna performance

• Detect signal degradation and system performance over time with trace overlay

• Handheld, lightweight, field-proven design withstands harsh environments and lighting conditions

StandardMeasurements &Applications :

(Cable & Antenna Analysis) 

• Reflection – Return Loss or VSWR 

• Fault Location – DFT/RL or DTF/VSWR 

• Cable Loss 

• 1-Port Phase 

• Smith Chart 

• FiberScope Fiber Connector Inspection (DML-OPI) 

• Optical Power Meter (DML-OPM) 

• Visual Fault Location (DML-VFL) 

StandardMeasurements &Applications :

(Spectrum Analysis) 

• Spectrum Analysis 

• Channel Power 

• Occupied Bandwidth (OBW) 

• Adjacent Channel Leakage Ratio (ACLR) 

• Field Strength 

• AM/FM 

Optional Measurement Modes:

• High Precision Power Meter (DML-015) 

• Interference Analysis (DML-110) 

• Coverage Mapping (DML-120) 

• Transmission Measurement (DML-025) 

• GPS Receiver (DML-999)

Specifications:

General Specifications:

Connectors

RF In

Type N, female, 50Ω

RF In Damage

+30 dBm, +50 VDC

Connectivity

 

USB host

Type A, 1-Port

(connect flash drive for data transfer)

USB client

5-pin mini-B (connect to PC for data transfer)

LAN

10M/100M LAN Port

Display

Type / Size

TFT LCD / 8.4” (800 x 600)

Data Storage

Internal

1 GB, > 2000 saved measurement files

External

Limited by size of USB flash drive

Battery

Type

Li-Ion, 11.1V, 5.2AH

Operation

> 6.0 hours, continuous; 8.0 hrs, idle (CA mode)

> 4.0 hours, continuous; 8.0 hrs, idle (SA mode)

Environmental conditions

Operating Temperature

-10°C to + 55 °C

Storage Temperature

-40 °C to + 75 °C

Shock

Mil-PRF-28800F Class 2

EMC

European EMC

IEC/EN 61326-1:2006

AC Power

AC Adapter Output

15-19 VDC

AC Adapter Input

100 – 240 VAC, 50-60 Hz

Size & Weight

 

Size

258 mm x 173 mm x 74 mm

(10.2 in x 6.8 in x 2.9 in)

Weight

3 kg (6.6 lbs)

Specifications : Cable Analyzer

Model

E7042B

Frequency

Frequency Range

2 MHz – 4 GHz

Resolution

1 kHz

Measurement Speed

Reflection

DTF

< 0.8 mS/point

< 1 mS/point

Data Points

130, 259, 517, 1033, 2065

Measurement Accuracy

 

Corrected Directivity

42dB (typical, after standard OSL calibration)

38dB (typical, after eCAL calibration)

Output Power

0 dBm (Nominal)

Interference Immunity

On-channel

+20 dBm @ >1 MHz of carrier frequency

Off-channel

+10 dBm within ± 10 kHz of carrier frequency

Measurements

Return Loss

0 to 60dB (resolution 0.01 dB)

VSWR

1:1 to 65:1 (resolution 0.01)

Cable Loss

0 to 30dB (resolution: 0.01 dB)

DTF Range

 (Distance) 1500 meters (4921 feet)

Connectors (Reflection/RF Out)

RF Out

Type N, female, 50Ω

RF Out Damage Level

25 dBm, ± 50 VDC peak

Impedance

50Ω

Specifications: Optical Measurements

Optical Microscope

Field of view

680 mm x 510 mm

Resolution

0.5 mm

Light source

Blue LED

Focus control

Adjustable

Dimensions

175 mm *435 mm

Weight

200 g

Optical Power Meter

Accuracy

±0.25dB

Probe Type

InGaAs Ф300μm

Dynamic Range

-50dBm ~ +27dBm

Resolution

0.01 dBm, mW, uW, nW

Wave Length

 

850 nm, 980 nm, 1300 nm, 1310nm, 1490 nm,

1550nm, 1610 nm

Adapter

FC/SC/ST

VFL

Output Power

10mW

Adapter

FC/PC

Specifications: Spectrum Analyzer

Frequency

Frequency Range

9 kHz ~4 GHz

Tuning Resolution

1 Hz

Aging

<± 1.0ppm/yr

Frequency Span

 

1 kHz to 4 GHz in 1-2-5 sequence (automode), and 0 Hz (zero span)

Bandwidth

 

Resolution Bandwidth (RBW)

10Hz to 3MHz in 1-3 sequence (auto or manually selectable)

Video Bandwidth (VBW)

 

10Hz to 3MHz in 1-3 sequence (auto or manually selectable)

Spectral Purity (Phase Noise)

 

@ 1 kHz Offset from carrier

90 dBc/Hz

@ 10 kHz Offset from carrier

100 dBc/Hz

@ 100 kHz Offset from carrier

105 dBc/Hz

Amplitude

Dynamic Range

> 100 dB

Measurement Range

DANL to maximum safe input level

Maximum Safe Input

 

+30dBm (peak power, input attenuation > 15dB), 50VDC

Amplitude Accuracy

 ≤ ± 1.0 dB

Attenuator Range

0 dB to 55 dB in 5 dB steps

Displayed Average Noise Level (DANL)

(Input terminated, RBW = 1 Hz, Attn = 0 dBm, Avg Detector)

Preamp Off

 

≤ -144 dBm, typical (1MHz – 1GHz)

≤ -138 dBm, typical (1GHz – 4GHz)

Preamp On

 

≤ -158 dBm, typical (1MHz – 1GHz)

≤ -154 dBm, typical (1GHz – 4GHz)

Specifications: RF Power Meter

USB Smart

RF Power Sensor

Frequency Range

1 kHz – 6 GHz

Measurement Range

1μW~100mW(-30~+20dBm)

VSWR

1.1

Resolution

1dB, 0.1dB, 0.01dB, 0.001dB

Dimensions

124mm *44mm* 24mm

Weight

250g

Accuracy Type.

±0.2dB

Inline RF Power Meter

Frequency range

300MHz to 4000MHz

Measurement Range

0.15W to 150W

Insert Loss

0.1dB

VSWR

1.1

Directivity

30dB

Accuracy

±4%±0.05W(+15~+35°C)

±7%±0.05W(-10~+50°C)

Connector Type

N(f), 50 Ω


Optional Accessories: