DEVISER E7062B SignalPROFILER RF Analyzer
Product Descriptions:
E7062B SignalPROFILER (CA: 2 MHz to 6 GHz, SA: 9 kHz to 6 GHz)
The SignalPROFILER combines the power and functionality of cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/Optical power measurements in a single instrument.
Key Features:
• RF, fiber and wireless signal quality testing – in a single instrument
• Perform traditional RF feedline tests, inspect fiber connectors with auto pass/fall results and measure RF/Optical power
• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment
• Test MIMO 4x4 antenna performance
• Detect signal degradation and system performance over time with trace overlay
• Handheld, lightweight, field-proven design withstands harsh environments and lighting conditions
StandardMeasurements &Applications :
(Cable & Antenna Analysis)
• Reflection – Return Loss or VSWR
• Fault Location – DFT/RL or DTF/VSWR
• Cable Loss
• 1-Port Phase
• Smith Chart
• FiberScope Fiber Connector Inspection (DML-OPI)
• Optical Power Meter (DML-OPM)
• Visual Fault Location (DML-VFL)
StandardMeasurements &Applications :
(Spectrum Analysis)
• Spectrum Analysis
• Channel Power
• Occupied Bandwidth (OBW)
• Adjacent Channel Leakage Ratio (ACLR)
• Field Strength
• AM/FM
Optional Measurement Modes:
• High Precision Power Meter (DML-015)
• Interference Analysis (DML-110)
• Coverage Mapping (DML-120)
• Transmission Measurement (DML-025)
• GPS Receiver (DML-999)
Specifications:
General Specifications:
Connectors | RF In | Type N, female, 50Ω |
RF In Damage | +30 dBm, +50 VDC | |
Connectivity
| USB host | Type A, 1-Port (connect flash drive for data transfer) |
USB client | 5-pin mini-B (connect to PC for data transfer) | |
LAN | 10M/100M LAN Port | |
Display | Type / Size | TFT LCD / 8.4” (800 x 600) |
Data Storage | Internal | 1 GB, > 2000 saved measurement files |
External | Limited by size of USB flash drive | |
Battery | Type | Li-Ion, 11.1V, 5.2AH |
Operation | > 6.0 hours, continuous; 8.0 hrs, idle (CA mode) > 4.0 hours, continuous; 8.0 hrs, idle (SA mode) | |
Environmental conditions | Operating Temperature | -10°C to + 55 °C |
Storage Temperature | -40 °C to + 75 °C | |
Shock | Mil-PRF-28800F Class 2 | |
EMC | European EMC | IEC/EN 61326-1:2006 |
AC Power | AC Adapter Output | 15-19 VDC |
AC Adapter Input | 100 – 240 VAC, 50-60 Hz | |
Size & Weight
| Size | 258 mm x 173 mm x 74 mm (10.2 in x 6.8 in x 2.9 in) |
Weight | 3 kg (6.6 lbs) |
Specifications : Cable Analyzer
Model | E7062B | |
Frequency | Frequency Range | 2 MHz – 6.1 GHz |
Resolution | 1 kHz | |
Measurement Speed | Reflection DTF | < 0.8 mS/point < 1 mS/point |
Data Points | 130, 259, 517, 1033, 2065 | |
Measurement Accuracy
| Corrected Directivity | 42dB (typical, after standard OSL calibration) 38dB (typical, after eCAL calibration) |
Output Power | 0 dBm (Nominal) | |
Interference Immunity | On-channel | +20 dBm @ >1 MHz of carrier frequency |
Off-channel | +10 dBm within ± 10 kHz of carrier frequency | |
Measurements | Return Loss | 0 to 60dB (resolution 0.01 dB) |
VSWR | 1:1 to 65:1 (resolution 0.01) | |
Cable Loss | 0 to 30dB (resolution: 0.01 dB) | |
DTF Range | (Distance) 1500 meters (4921 feet) | |
Connectors (Reflection/RF Out) | RF Out | Type N, female, 50Ω |
RF Out Damage Level | 25 dBm, ± 50 VDC peak | |
Impedance | 50Ω |
Specifications: Optical Measurements
Optical Microscope | Field of view | 680 mm x 510 mm |
Resolution | 0.5 mm | |
Light source | Blue LED | |
Focus control | Adjustable | |
Dimensions | 175 mm *435 mm | |
Weight | 200 g | |
Optical Power Meter | Accuracy | ±0.25dB |
Probe Type | InGaAs Ф300μm | |
Dynamic Range | -50dBm ~ +27dBm | |
Resolution | 0.01 dBm, mW, uW, nW | |
Wave Length
| 850 nm, 980 nm, 1300 nm, 1310nm, 1490 nm, 1550nm, 1610 nm | |
Adapter | FC/SC/ST | |
VFL | Output Power | 10mW |
Adapter | FC/PC |
Specifications: Spectrum Analyzer
Frequency | Frequency Range | 9 kHz ~6GHz |
Tuning Resolution | 1 Hz | |
Aging | <± 1.0ppm/yr | |
Frequency Span
| 1 kHz to 4 GHz in 1-2-5 sequence (automode), and 0 Hz (zero span) | |
Bandwidth
| Resolution Bandwidth (RBW) | 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) |
Video Bandwidth (VBW)
| 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) | |
Spectral Purity (Phase Noise)
| @ 1 kHz Offset from carrier | 90 dBc/Hz |
@ 10 kHz Offset from carrier | 100 dBc/Hz | |
@ 100 kHz Offset from carrier | 105 dBc/Hz | |
Amplitude | Dynamic Range | > 100 dB |
Measurement Range | DANL to maximum safe input level | |
Maximum Safe Input
| +30dBm (peak power, input attenuation > 15dB), 50VDC | |
Amplitude Accuracy | ≤ ± 1.0 dB | |
Attenuator Range | 0 dB to 55 dB in 5 dB steps | |
Displayed Average Noise Level (DANL) | (Input terminated, RBW = 1 Hz, Attn = 0 dBm, Avg Detector) | |
Preamp Off
| ≤ -144 dBm, typical (1MHz – 1GHz) ≤ -138 dBm, typical (1GHz – 4GHz) | |
Preamp On
| ≤ -158 dBm, typical (1MHz – 1GHz) ≤ -154 dBm, typical (1GHz – 4GHz) |
Specifications: RF Power Meter
USB Smart RF Power Sensor | Frequency Range | 1 kHz – 6 GHz |
Measurement Range | 1μW~100mW(-30~+20dBm) | |
VSWR | 1.1 | |
Resolution | 1dB, 0.1dB, 0.01dB, 0.001dB | |
Dimensions | 124mm *44mm* 24mm | |
Weight | 250g | |
Accuracy Type. | ±0.2dB | |
Inline RF Power Meter | Frequency range | 300MHz to 4000MHz |
Measurement Range | 0.15W to 150W | |
Insert Loss | 0.1dB | |
VSWR | 1.1 | |
Directivity | 30dB | |
Accuracy | ±4%±0.05W(+15~+35°C) ±7%±0.05W(-10~+50°C) | |
Connector Type | N(f), 50 Ω |
Optional Accessories:
Contact us
____________
Shanghai Govo Telecom Co., Ltd.
Add: Room 616, North Building, Fortune 108 Square, 1839#Qixin Road,
Minhang District, 201101, Shanghai, China
Email: gw@gwfiber.com; veronica@govochina.cn
Contact: Ms. Veronica Zhao
Office: +86 21-6 0 7 1 2 3 2 5
Mob: +86 1 3 7 8 8 9 1 3 2 6 7
Skype: govochina
Products
_________
Fiber Optic Tool & Tool Kit
Fiber Optic Splicing Equipment
Fiber Optic Test Instrument
Ethernet Cable Tester
Fiber Optic Cable
Optical Fiber