YOFC OM2+/OM3/OM4 Bend Insensitive Multimode Fibre
Descriptions:
YOFC MaxBand® OM2+ Bend Insensitive Multimode Fibre complies with or exceeds ISO/IEC 11801-1 OM2 specification, IEC 60793-2-10 A1-OM2 specification, and TIA-492AAAF A1-OM2 specification.
YOFC MaxBand® OM3/OM4 Bend Insensitive Multimode Fibres comply with or exceed ISO/IEC 11801-1 OM3/OM4 specifications, IEC 60793-2-10 A1-OM3/A1-OM4 specfications, and TIA-492AAAF A1-OM3/A1-OM4 specifications.
Features:
lOptimized for 850nm VCSEL
lCompatibility with current OM2+/OM3/OM4 multimode fibre
lSuperior geometry uniformity
lLow attenuation
lHigh bandwidth
lLow differential mode delay (DMD)
lVery low macro-bending sensitivity
lsupports the use and installation of optical cables with a small bending radius
Benefits:
lCoated with YOFC's proprietary dual layer UV curable acrylate
lHigh resistance to micro-bending
lOptimized performance in tight-buffer cable applications
lStable performance over a wide range of environmental conditions
Applications:
lData centers
lData storage networks
lHigh-performance computing centers a
lOffice centers
lLocal area networks (LAN)
l1 & 10 & 40 & 100 & 400 Gb/s Ethernet
System Link Length:
Specifications:
Characteristics | Conditions | Specified values | Units |
Geometry Characteristics | |||
Core Diameter | -- | 50±2.5 | [μm] |
Core Non-Circularity | -- | ≤5.0 | [%] |
Cladding Diameter | -- | 125.0±1.0 | [μm] |
Cladding Non-Circularity | -- | ≤0.6 | [%] |
Coating Diameter | -- | 245±7 | [μm] |
Coating/Cladding Concentricity Error | -- | ≤10.0 | [μm] |
Coating Non-Circularity | -- | ≤6.0 | [%] |
Core/Cladding Concentricity Error | -- | ≤1.0 | [μm] |
Delivery Length | -- | up to 8.8 | [km/reel] |
Optical Characteristics | |||
Attenuation | 850nm | ≤2.4 | [dB/km] |
1300nm | ≤0.6 | [dB/km] | |
-- | -- | MaxBand® OM2+/OM3/OM4 Bend Insensitive | |
Overfilled Modal Bandwidth | 850nm | ≥700/≥1500/≥3500 | [MHz·km] |
1300nm | ≥500/≥500/≥500 | [MHz·km] | |
Effective Modal Bandwidth | 850nm | ≥950/≥2000/≥4700 | [MHz·km] |
Application support distance on | -- | -- | -- |
40GBASE-SR4 / 100GBASE-SR101 | 850nm | -/140/170 | [m] |
10GBASE-SR | 850nm | 150/300/550 | [m] |
1000BASE-SR | 850nm | 750/1000/1100 | [m] |
DMD Specification | Compliant with and more stringent than the requirements of IEC60793-2-10 | -- | |
Numerical Aperture | -- | 0.200±0.015 | -- |
Group Refractive Index | 850nm | 1.482 | -- |
1300nm | 1.477 | -- | |
Zero Dispersion Wavelength(λ0) | -- | 1295-1340 | [nm] |
Zero Dispersion Slope(S0) | 1295nm≤λ0≤1310nm | ≤0.105 | [ps/(nm2·km)] |
1310nm≤λ0≤1340nm | ≤0.000375(1590-λ0) | [ps/(nm2·km)] | |
Macrobending Loss2 | -- | -- | -- |
2 Turns @ 15 mm Radius | 850nm | ≤0.1 | [dB] |
1300nm | ≤0.3 | [dB] | |
2 Turns @ 7.5 mm Radius | 850nm | ≤0.2 | [dB] |
1300nm | ≤0.5 | [dB] | |
Backscatter Characteristics | 1300nm | ||
Step(Mean of Bidirectional Measurement) | -- | ≤0.10 | [dB] |
Irregularities Over Fibre Length and Point Discontinuity | -- | ≤0.10 | [dB] |
Attenuation Uniformity | -- | ≤0.08 | [dB/km] |
Environmental Characteristics | 850nm & 1300nm | ||
Temperature Cycling | -60℃ to 85℃ | ≤0.10 | [dB/km] |
Temperature-Humidity Cycling | -10℃ to 85℃,4% to 98% RH | ≤0.10 | [dB/km] |
Water Immersion | 23℃, 30 days | ≤0.10 | [dB/km] |
Dry Heat | 85℃,30 days | ≤0.10 | [dB/km] |
Damp Heat | 85℃, 85% RH,30 days | ≤0.10 | [dB/km] |
Mechanical Specification | |||
Proof Test | -- | ≥9.0 | [N] |
-- | ≥1.0 | [%] | |
-- | ≥100 | [kpsi] | |
Coating Strip Force | typical average force | 1.5 | [N] |
peak force | ≥1.3, ≤8.9 | [N] | |
Dynamic Stress Corrosion Susceptibility Parameter (nd, typical) | -- | 20 | -- |
Remarks: 1. Support distances considering maximum cable attenuation of 3.0 dB/km at 850 nm,
maximum total splice/connector loss of 1.0 dB and VCSELs maximum RMS spectral width ≤ 0.45 nm.
2. The launch condition for the macrobending loss measurement fulfils that described in IEC 61280-4-1.
Contact us
____________
Shanghai Govo Telecom Co., Ltd.
Add: Room 616, North Building, Fortune 108 Square, 1839#Qixin Road,
Minhang District, 201101, Shanghai, China
Email: gw@gwfiber.com; veronica@govochina.cn
Contact: Ms. Veronica Zhao
Office: +86 21-6 0 7 1 2 3 2 5
Mob: +86 1 3 7 8 8 9 1 3 2 6 7
Skype: govochina
Products
_________
Fiber Optic Tool & Tool Kit
Fiber Optic Splicing Equipment
Fiber Optic Test Instrument
Ethernet Cable Tester
Fiber Optic Cable
Optical Fiber